Structural Epoxy Pouring Resin
Optional Grout Version - thicker than the Resin Version, a darker Grey, slower to pour and level.
Pouring Structural Pouring Grout.
(Pouring Resin version is Grey, Pouring Grout is Dark Grey.)
Sizes - 1 litre, 2.5 litre and 7.5 litre tubs.
Two versions - Resin or Grout - supplied as three part, thick porridge like pouring resins (two liquids and a powder).
Uses - for filling holes and, in combination with reinforcement rods, for structural repair of timber and masonry, including concrete. Self levelling, self de-gassing (bubbles of air, trapped during mixing, will rise to the surface and escape)
Mixing Structural Pouring Resin with a Mixing Paddle - it will self-level.
Mixing - mix using a paddle in an electric drill.
Usage rate - by volume - 1 litre will fill a void 100mm x 100mm x 100mm (4" x 4" x 4"). A hole 300mm x 300mm x 300mm (1ft x 1ft x 1ft) will require 27 litres.
Frequently purchased with this product - Mixing Paddle, 1 litre Cartridge Tube Kit, 1 litre Professional Skeleton Gun.
For the thicker Grout option call us on 01626 872886 to discuss your application - we'll help you choose the correct product.
Click to go to the top of the page
Prices for Structural Epoxy Pouring Resin and Pouring Grout
2.5
litres of Pouring Resin - Resin
Version - £75.11 - 
2.5
litres of the thicker Grout Version - £75.11 -
7.5
litres of Pouring Resin - Resin
Version - £150.22 -
7.5
litres of the thicker Grout Version - £150.22 -
Click to go to the top of the page
Frequently purchased with this product:
Epoxy
Cleaner/Remover - 250cc Can - £7.67 -
Mixing Paddle - £4.50 -
1
litre Cartridge Kit - £4.25 -
1
litre Professional Skeleton Gun - £26.98 -
Shuttering,
Plastic Sheet - 670mm x 550mm - £12.50 -
Shuttering
Release Wax - £5.95 -
Box
of 100 Disposable Vinyl Unihanded Gloves - £13.70 -
Click to go to the top of the page
Thixotropic Injection and Laminating Resin
A two part, (two gels) thick injection resin. This resin does not drip or run - it is similar in consistency to Vaseline or Swarfega.
1 litre Cartridge Kit
Brightly coloured base allows easy mixing.
Sizes - 400cc and 1000cc (1 litre)
Uses:
1. For injecting into cracks, slots and holes, when used with a Cartridge Tube Kit.
2. For laminating and bonding materials together, by spreading.
3. For MOT Brake Roller re-coating, in combination with our Grits.
4. In combination with reinforcement rods, for structural repair of timber and masonry, including concrete.
5. As an anchor resin, to bond rods, studs, bolts and reinforcement into masonry and concrete.
Using Thixotropic Injection and Laminating Resin
Mixing - mix using a pallet knife, by hand.
Usage rate - by volume - 1 litre will fill a void 100mm x 100mm x 100mm (4" x 4" x 4"). A 400cc pack will fill a hole 25mm in diameter to a depth of 800mm. Extension tubes are available, made to order, to reach the base of any hole depth and in varying diameters.
Frequently purchased with this product - Mixing Knife, 400cc Cartridge Tube Kit, 400cc Skeleton Gun, 1 litre Cartridge Tube Kit, 1 litre Skeleton Gun, Vinyl Gloves (Box of 100).
Click to go to the top of the page
Prices for Thixotropic Injection and Laminating Resin
Standard Setting
Thixotropic
Resin - 400cc - £29.87 -
Thixotropic
Resin - 1 litre - £49.89 -
Slow Setting
Thixotropic
Slow Set Resin - 400cc - £31.94 -
Thixotropic
Slow Set Resin - 1 litre - £52.87 -
Note - both sizes of Thixotropic Resin require a Cartridge (at extra cost), if being used for injection, rather than spreading.
Click here to go to Cartridge Tubes Section, if you need to inject the product.
Click to go to the top of the page
Frequently purchased with this product:
Pallet
Knife for mixing - £9.52 -
Professional
Skeleton Gun - 400cc - £16.50 -
Professional
Skeleton Gun - 1000cc - £26.98 -
Box
of 100 Disposable Vinyl Unihanded Gloves - £13.70 -
Epoxy
Cleaner/Remover - 250cc Can - £7.67 -
Click here to go to Cartridge Tubes Section, if you need to inject the product
Click to go to the top of the page
Epoxy Mouldable Putty
Mouldable Epoxy Putty - mixing wearing Gloves - colour with our Powder.
Keep the Pots at room temperature for some hours before mixing - cold putty is hard on the knuckles.
Sizes - 500cc and 1000cc (1 litre)
Uses - fills and structurally repairs wood, brick, stone, concrete, some plastics and bonds most metals. Will set underwater.
Mixing - simply take equal portions in gloved hands and mix together, like window putty or bread dough, until a perfectly even colour. Apply with a pallet knife or by hand placing. Do not mix more than you can place and shape in 10 - 15 minutes. This is a reasonable handful to mix.
Usage rate - 1 litre of putty will fill a hole 4 inches x 4 inches x 4 inches (100mm x 100mm x 100mm).
Frequently purchased with this product - Colour Powder, Colour Pigment, Vinyl Disposable Gloves (Box of 100 uni-handed Vinyl), Epoxy Cleaner for Tools, Epoxy Primer/Consolidator.
Click to go to the top of the page
Prices for Epoxy Mouldable Putty
Epoxy
Putty - 500cc - £14.85 -
Epoxy
Putty - 1 litre - £24.60 -
Click to go to the top of the page
Frequently purchased with this product
Pallet Knife for mixing - £9.52 -
Box
of 100 Disposable Vinyl Unihanded Gloves - £13.70 -
Epoxy
Cleaner/Remover - 250cc Can - £7.67 -
Colouring Powders - £2.95
Colouring
Powder 50g - black -
Colouring
Powder 50g - brown -
Colouring
Powder 50g - red -
Colouring
Powder 50g - white -
Click to go to the top of the page
Rebuild Resin
Apply Rebuild Resin with a Pallet Knife.
Easy to sand and paint.
Size - 400cc twin pot and 380cc twin tube cartridges
Uses - repair window frames, door frames, timber frames or other wooden structures.. Can be used as an adhesive to bond timber pieces into frames.
Mixing - this filler/adhesive consists of two soft, creamy materials, gunned to give a perfect mix ratio. Mix with a putty knife. There is no shrinkage and it is totally waterproof. This is a professional repair material, as used by window frame repair specialists.
Usage rate - 380cc will fill a 10mm x 100mm slot for a length of 380mm
Frequently purchased with this product - Pallet Knife, Vinyl Gloves, Epoxy Primer, Epoxy Cleaner/Remover.
Click to go to the top of the page
Prices for Rebuild Resin
Rapid & Standard Versions
Available in two pots (500cc), or in cartridges (380cc)
Twin
Pot Version - Standard Set - 400cc - £21.58 -
(No Skeleton Gun required)
Rapid
Set - 380cc cartridge - £39.87 per tube -
Standard
Set - 380cc cartridge - £37.28 per tube -
Skeleton
Gun to fit both cartridge types - £28.90 -
Using a Skeleton gun gives a precise dispensing ratio for consistent results.
Click to go to the top of the page
Frequently purchased with this product
Pallet Knife for mixing - £9.52 -
Box
of 100 Disposable Vinyl Unihanded Gloves - £13.70 -
Finish the job off with our Boron Paste and Boron Rods - these provide internal rot and insect attack protection by dissolving inside the timber. See our Boron Shop for details.
Click to go to the top of the page
Epoxy Primer/Consolidator
Sizes - 500cc and 1000cc (1 litre)
Uses - Epoxy Primer should always be used before applying Mouldable Epoxy Putty onto smooth timber, planed timber, hardwoods, stone, brick, concrete or render. However, on rough or well dugout softwood timber it is not strictly required.
Ensure that ALL rotted wood is cut out completely. Filling over rot is a waste of money.
Mixing - mix the two liquids thoroughly together in the ratio 2 Base to 1 Activator until a perfectly even colour. Pour into another clean container and re-mix. Apply with a brush, or by pouring.
Usage rate - 1 litre of Epoxy Primer will cover 1 square metre at a thickness of 1mm, or about 6 square metres at a normal paint film thickness.
Frequently purchased with this product - Vinyl Disposable Gloves (Box of 100 uni-handed), Syringes.
Click to go to the top of the page
Prices for Epoxy Primer/Consolidator
Epoxy
Primer - 500cc - £22.47 -
Epoxy
Primer - 1000cc - £35.85 -
Click to go to the top of the page
Frequently purchased with this product
Pallet
Knife for mixing - £9.52 -
Box
of 100 Disposable Vinyl Unihanded Gloves - £13.70 -
Epoxy
Cleaner/Remover - 250cc Can - £7.67 -
Finish the job off with our Boron Paste and Boron Rods - these provide internal rot and insect attack protection by dissolving inside the timber. See our Boron Shop for details.
Click to go to the top of the page
Syringes
Sizes - 10cc, 20cc and 50cc. Outlet outside diameter 4mm.
Uses
Measuring - for dosing liquid Epoxies, such as Epoxy Primer, to maintain the correct mix ratios (keep one syringe with each part - Activator and Base).
Injecting - for injecting liquid and Thixotropic Epoxies, such as Epoxy Primer or Thixotropic Injection Resin, into small holes in order to fill fine cracks or hollow sections behind cracked plaster, render or tanking.
Click to go to the top of the page
Prices for Syringes
10cc
Syringe - £0.52 -
20cc Syringe - £0.75 -
Needles available for 10cc and 20cc.
50cc Syringe - £1.78 -
Epoxy Cleaner/Remover - 250cc Can - £7.67 -
Finish the job off with our Boron Paste and Boron Rods - these provide internal rot and insect attack protection by dissolving inside the timber. See our Boron Shop for details.
Click to go to the top of the page
Rods and Bars - GRP and Carbon, Zinc Plated Steel Allthread, Helical Stainless Steel
Glass and Carbon Reinforced Bars
High Tensile Zinc Plated Allthread Bars
Helical Bar
Uses - reinforcement of timber beams, brick, concrete and stone structures.
Epoxy-Glass Bars - cut from 1 metre, 2 metre or 3 metre lengths
Available in 6, 8 10, 12, 16 and 20mm diameters
Zinc Plated High Tensile Steel Allthread - cut from 3 metre lengths
Available in 12, 16, 20, 25mm diameters
Helical Stainless Steel Bar
Available in 6mm and 8mm diameters, 1 metre or 7 metre lengths. Each 1 metre length will make one typical brickwork or blockwork 'stitch'.
Click to go to the top of the page
Prices - Bars for reinforcement
Epoxy-Glass Bars per metre
Call 01626 872886 for prices
6mm x 1 metre
8mm x 1 metre
10mm x 1 metre
12mm x 1 metre
16mm x 1 metre
20mm x 1 metre
2 metre and 3 metre length options, or cut to Order
High Tensile Steel per metre
Call 01626 872886 for prices
12mm BZPHT Steel Allthread
16mm BZPHT Steel Allthread
20mm BZPHT Steel Allthread
25mm BZPHT Steel Allthread
Helical Bar per metre
6mm
x 1 metre - £4.88 -
Also available in 7 metre coils.
Priced by Telephone to suit your project - supplied cut to length - call 01626 872886
Click to go to the top of the page
Empty Cartridge Tubes - with pistons and nozzles
400cc Cartridge Kit
1000cc Cartridge Kit
Tube Volumes - 400cc and 1000cc (1 litre)
Uses - these Cartridge Kits are supplied empty ready to hand fill with our Structural Epoxy Pouring Resin (by pouring) or with our Thixotropic Injection Resin by using the 'pusher plate' supplied with the Kit.
Filling - the pusher plate drops into the pot containing the mixed resin and allows the open end of the tube to be pushed down into the pot, filling itself as it goes down.
Dimensions of the cartridges
400cc - 250mm/10 inches long tube, with piston and pointed nozzle
1000cc - 250mm/10 inches long tube, with piston and pointed nozzles
Frequently purchased with this product - 400cc or 1000cc Skeleton Gun, Extension Injection Tubes - ring us to discuss your exact requirements.
Click to go to the top of the page
Prices - Empty Cartridge Tube Kits
Buy 400cc Cartridge Tube Kit
400cc Kit - £2.25 -
Buy 1000cc Cartridge Tube Kit
1000cc - £4.85 -
You can specify the length of extension tube that you require.
They are available in the following diameters: outer tube diameter -
8mm, 10mm and 15mm.
(Other sizes - specially made to order).
Click to go to the top of the page
Empty Cartridge Tubes - fitted with a Luer Needle Adapter Nose
Supplied with pistons and nozzles.
A range of needles is available from 1.8mm outer diameter
Needle tip is 2mm in outer diameter.
400cc Cartridge Tube with Needle injecting a brick
Sizes - 400cc only
Uses - these Cartridge Kits are supplied empty ready to hand fill with our Thixotropic Injection Resin Slow Set by using the 'pusher plate' supplied with the Kit.
Filling - ensure that the Resin has been stored at room temperature (15 to 20C) for at least 4 hours before use. The pusher plate drops into the pot containing the mixed resin and allows the open end of the tube to be pushed down into the pot, filling itself as it goes down.
Sizes
400cc - 250mm/10 inches long tube, with piston and Needle - 2mm diameter x 30mm long
Click to go to the top of the page
Price for Empty Needle Nosed Cartridge fitted as follows:
with a football inflate Needle nose - Kit complete with piston and pot filling pusher
Needle
Nosed Cartridge - 400cc Kit - £7.98 -
Click to go to the top of the page
Extension Nozzles - for cartridge tubes
Sizes - 400cc and 1000cc x 400mm long
400cc Cartridge Extension Tube, 10mm diameter
1 Litre Cartridge Extension Tube, 10mm diameter
1 Litre Cartridge Extension Tube, 15mm diameter
Click to go to the top of the page
Uses - to extend the Cartridge Nozzle so that holes can be injected with resin correctly - from the hole base outwards. This minimises the risk of air voids within the resin, a cause of bond weakness.
Sizes - to fit either the 400cc or 1000cc Cartridge Tubes, with differing length extensions to suit the hole depth.
Specials - we can fit varying lengths of tubing to the threaded adapters to suit your job. Please call us on 01626 872886 .
Click to go to the top of the page
Prices for Extension Nozzles - for cartridge tubes
8mm Diameter Extension Nozzles
400mm
long - for 400cc Tube - £4.65 -
10mm Diameter Extension Nozzles
400mm
long - for 400cc Tube - £4.85 -
400mm
long - for 1 Litre Tube - £6.25 -
15mm Diameter Extension Nozzles
400mm
long - for 400cc Tube - £7.50 -
400mm long - for 1 Litre Tube - £7.50 -
The Diameter given is the outer dimension (OD).
Click to go to the top of the page
Skeleton guns
400cc Skeleton Gun - for injection using UltraCure 400cc and all other products in single tubes, 280cc to 400cc
400cc Skeleton Gun - single piston
1000cc Skeleton Gun - Special 1 Litre gun for injection using UltraCure 1000cc or other 1 Litre products.
1000cc Skeleton Gun - single piston
380cc 1:1 to 3:1 Skeleton Gun - gun for injecting Pure Epoxy Resin and similar side by side resin cartridges.
Twin piston, side by side,
380cc Skeleton Gun, 1:1,
Click to go to the top of the page
Prices for Skeleton Guns - 3 types
To fit most standard sealant cartridge tubes, short and long, professional quality.
310/400cc
- £16.50 -
For the fatter, 1 litre cartridge tube only.
1000cc
- £26.98 -
For Epoxy Resin cartridge tubes, having equal sized pistons for 1:1 and 3:1 mixes.
380cc/1:1
to 3:1 gun - £28.90 -
Click to go to the top of the page
Colouring Additives
Pigments and Powders
Pigment in Red - in the cartridge
Uses - add to Mouldable Epoxy Putty, Thixotropic Injection Resins.
Natural yellow wood/sand colour.
This colour can be modified using either Pigment dissolved in Epoxy Resin or Powders.
Click to go to the top of the page
Prices for Colouring Additives
£4.78 for Pigments, enough for up to 400cc
£2.50 for Powders, enough for up to 400cc
Pigments
Liquid
Grey - for 400cc -
Liquid
Red - for 400cc -
Powders
Powder
50g - black -
Powder
50g - brown -
Powder
50g - red -
Powder 50g - white -
Click to go to the top of the page
Epoxy Remover/Cleaner Fluid
250cc Epoxy Cleaner Remover
Uses - for removing uncured Epoxy Resins from surfaces and tools
Minimal smell, non-flammable, clear solvent - can be used to dilute Epoxy Resins (up to a maximum of 5%) and for smoothing Epoxy filled surfaces.
Click to go to the top of the page
Price for Epoxy Remover/Cleaner Fluid
Clear, non-flammable, low odour
250cc
can - £7.67 -
Click to go to the top of the page
Hole Cleaning Blow Out Pump
A 'puffer' pump for hole cleaning
Uses - for blowing out holes and slots prior to resin injection, in order to removed loose material and dust. Use the Hole Cleaning Brush first.
Click to go to the top of the page
Price for Hole Cleaning Pump
Pump
- £4.99 -
Click to go to the top of the page
Slotting Tools - All Metal Chisels - deep slot clearance
All Steel Chisel - standard length 14 inches - also available extended (24 inch)
All Metal Chisels, made of solid steel, can be used with lump hammers and as levers, to clean out slots and tidy up previously roughly cut out cavities in wood.
Sizes - 14 inch or 24 inch x 30mm
Click to go to the top of the page
Prices for All Steel Chisels
Standard length; 14 inches
30mm
wide - £19.87 -
Extended length: 14" plus 10 inches
30mm
wide - £39.87 -
Click to go to the top of the page
Timber Repair Kit - Timber-Resin Splices made to order - any size - to repair Structural Beams and Joists
TRS Kit - Zinc Plated 8.8 Dowels in softwood
For repairing timber beams, lintols, rafters, tie beams, carrier beams, joists and bressumers. These bespoke beam kits contain a new, laminated structural timber, made in kiln dried wood to C24 Grade or higher, fitted with connector bars made from zinc plated 8.8 Grade High Tensile Allthread bar. Pouring or injection resins are also included.
Engineering - free Design, Method Statement and Tools List (Hire available).
Frequently purchased with this product - additional Structural Pouring Resin
£ POA - price on application, Free Quotation - call us on 01626 872886
Have a look at full details of the Timber-Resin Splice System at:
www.timber.org.uk and www.timber-repair.co.uk
Fugenex Dry Rot Sensors
Uses - change colour from blue to spotty yellow to indicate live dry rot
For Amateur, DIY and Professional use
The Fugenex Dry Rot Sensor Kit contains 8 treated sticks with plastic caps.
Click to go to the top of the page
Buy Dry Rot Sensor Sticks
£41.00
- buy
pack of 8 Dry Rot Sensors -
Click to go to the top of the page
Using Dry Rot Sensors
Application methods - push into a drilled hole about 8mm in diameter, in wood or masonry
The blue detector dye, that is vacuum impregnated into the wooden dowel, reacts to the chemical that Dry Rot produces (oxalic acid) at very low levels,
turning the dye to yellow, initially in patches or blotches.
Click to go to the top of the page
Always Buy Safety Accessories
Box
of 100 uni-handed vinyl gloves - £13.70 -
Frequently purchased with this product
Pack
of 25 plastic plugs, for 10mm holes - £3.75 -
Click to go to the top of the page
1. Wood Hole Filling by Pouring
Structural Epoxy Pouring Resin
Optional Grout version, Black (thicker)
Structural Epoxy Resin for hole filling
Pouring Structural Pouring Grout.
(Pouring Resin is Grey, Pouring Grout is Black.)
Sizes - 1 litre, 2.5 litre and 7.5 litre kegs.
Two versions - Resin or Grout - supplied as three part, thick porridge like pouring resins (two liquids and a powder).
Uses - for filling holes and, in combination with reinforcement rods, for structural repair of timber and masonry, including concrete. Self levelling, self de-gassing (bubbles of air, trapped during mixing, will rise to the surface and escape)
Click to go to the top of the page
Prices for Kits - includes the 3 part resin pack, plus a Free Mixing Paddle.
2.5
litres of Pouring Resin - £75.11 -
7.5
litres of Pouring Resin - £150.22
-
Epoxy
Cleaner 250cc
can - £7.67 -
Click to go to the top of the page
2. Wood - Splits & Holes, filling with putty
Epoxy Primer/Consolidator plus
Mouldable Epoxy Putty
Includes: 1 litre of Epoxy Putty, 0.5 litres of Epoxy Primer, Box of 100 Uni Handed Vinyl Gloves, Smoothing Roller.
Mouldable Epoxy Putty
Wood
Split Filling, Kit - £41.35 -
Additional
Putty - 1 litre - £24.60 -
Additional
Primer - 500cc - £22.47 -
Epoxy
Cleaner 250cc
can - £7.67 -
Click to go to the top of the page
3. Timber Hollowness Injection
Epoxy Primer/Consolidator
Includes: 0.5 litres of Epoxy Primer, Syringes - set of 3, Box of 100 Uni Handed Vinyl Gloves
Syringes used for injection
Injection,
Kit No. 8 - £31.79 -
Additional
Primer - 500cc - £18.20 -
Additional
Primer - 1000cc - £27.88 -
Epoxy
Cleaner 250cc
can - £7.67 -
Click to go to the top of the page
4. Wood Split Stitching
Thixotropic Epoxy Resin plus Epoxy/Glass Bars
Includes: 10 x 6mm x 1 metre Epoxy Glass Bar, 400cc Thixotropic Resin, 400cc Cartridge Kit, Mixing Knife, Box of 100 Uni Handed Vinyl Gloves, Extension Tube 10mm x 400mm.
Stitching Rods and Resin
Stitching,
Kit - £87.58 -
SLOW
SET Stitching Kit - £87.58 -
Additional
SLOW SET Resin - £31.94 -
Epoxy
Cleaner 250cc
can - £7.67 -
Click to go to the top of the page
5. Wood Re-Surfacing
Rebuild Resin
Includes: 385cc Timbabuild Resin, 500cc Epoxy Wood Hardener/Primer, Mixing Knife, Box of 100 Uni Handed Vinyl Gloves
Rebuild Resin from a Cartridge - ready to mix
Timber
Rebuild, Kit - £66.10 -
Timber
Rebuild Resin, 400cc - £21.58 -
Wood Hardener Resin - 500cc - £22.47 -
380cc/1:1
to 3:1 gun - £28.90 -
Epoxy
Cleaner 250cc
can - £7.67 -
Click to go to the top of the page
Woodworm Treatment in water - for DIY Domestic, Amateur and Professional use
Product Name - Lignotec - 5 litres ready to use in water
Product Name - Microtech Dual Purpose Concentrate - 0.5 litre concentrate, makes 25 litres in water
20 Year Guarantee Certificate options, for DIY, Amateur and Professional use
Woodworm Treatment in water - Lignotec
Uses - woodworm treatment for bare wood, on floors, walls and in roofs
Why it's so good
Supplied ready to use
Unique features - no smell, no staining, carpet friendly, no hydrocarbon solvent, registered as an Insecticide
Typical usage - woodworm treatment where odour is not acceptable
Warning - do not apply to modern breathing roofing membranes
Buy Lignotec Woodworm Treatment - ready to use in water
LIGNOTEC 5.0 Litres - £37.70 ex VAT - £45.24 including VAT -
(Cost per litre - £9.05 including VAT)
Buy Microtech Woodworm Treatment - concentrate makes 25 litres in water
MICROTECH Insecticide Concentrate - makes 25 litres - £47.12 ex VAT - £56.54 including VAT -
(Cost per litre - £2.26 including VAT)
Buy Microtech Woodworm and Fungal Treatment - concentrate makes 25 litres in water
MICROTECH Fungicide/Insecticide Concentrate - makes 25 litres - £94.25 ex VAT - £113.10 including VAT -
(Cost per litre - £4.52 including VAT)
GUARANTEE 20 years - £20.00 ex VAT - £24.00 including VAT - bespoke Guarantee Certificate - ask for Application Form -
SAFETY
GLOVES x 100 - £13.70 ex VAT - £16.44 including VAT - box of 100 uni-handed vinyl gloves -
MASK - £8.78 ex VAT - £10.54 including VAT - for Lignotec and Boron water based product spraying -
Note - always wear a mask and gloves during spraying
Spray and Dust Mask (P2V)
MASK - £8.78 ex VAT - £10.54 including VAT - for Lignotec and Boron water based product spraying -
Vinyl Disposable Uni-handed Gloves
GLOVES x 100 - £13.70 ex VAT - £16.44 including VAT - box of 100 uni-handed vinyl gloves -
GUARANTEE
GUARANTEE 20 years - £20.00 ex VAT - £24.00 including VAT - bespoke Guarantee Certificate - ask for Application Form -
Delivery - 2 to 3 day mainland England and Wales - up to 20kgs - £8.75 ex VAT, £10.50 inc. VAT
Other regions available when checking out.
SPRAYERS
5 litre Sprayer
SPRAYER POT - £28.78 ex VAT - £34.54 including VAT - 5 litre Sprayer -
12 litre Heavy Duty Sprayer
SPRAYER BACKPACK - £66.93 ex VAT - £80.32 including VAT - 12 litre Knapsack Sprayer -
ACCESSORIES SUMMARY
MASK - £8.78 ex VAT - £10.54 including VAT - for Lignotec and Boron water based product spraying -
GLOVES x 100 - £13.70 ex VAT - £16.44 including VAT - box of 100 uni-handed vinyl gloves -
SPRAYER POT - £28.78 ex VAT - £34.54 including VAT - 5 litre Sprayer -
SPRAYER BACKPACK - £66.93 ex VAT - £80.32 including VAT - 12 litre Knapsack Sprayer -
How much will I need
How much solution will I need for two light coats on rough sawn timber?
5 litres covers approximately 12.5 square metres, with 2 light coats
Important Tips
Apply to bare wood only - will NOT penetrate paint, varnish, stain, wax or other water repellant coatings. This is the same for ALL Insecticides.
Check that water can be absorbed by testing the surfaces using drops of water. If any of the water is repelled do not apply the product.
Application to non-absorbing surfaces or over-application will result in white stains being left on the surface when dry.
Remove any liquid with a damp sponge from areas that cannot absorb water before the product dries - e.g. Painted skirting boards. Wear gloves.
Failure to wipe off painted surfaces may leave a hard to remove dirty marks caused by over-spray diluted dirt picked up from the floor.
To remove dried on product try hot water, vinegar or diluted Bleach.
DO NOT USE IN ANY BUILDING THAT HOUSES ANIMALS OR FISH, ASTHMATICS, BABIES OR PREGNANT WOMEN.
Pack and product details
Pack sizes - 5 litres
Packaging - in plastic bottles, pre-diluted ready to use
Trade - in boxes containing 3 x 5 litres = 15 litres - call for Trade Deal prices
Contains - Permethrin
Using Lignotec
Dilution - do not dilute
A Registered Amateur and Professional product for use in Domestic and Commercial buildings
Application methods - spray, brush or dip, or Microsprayer
Application rate - an average rate of 4 to 5 sq metres per litre, until wet. Apply two coats on rough sawn timber, allowing surfaces to dry in between coats.
Allow only one coat on smooth or planed timbers
Safety of Lignotec
Choosing a product type - always check with our experts if you are not sure which product is best for your job - 01626 872886
Safety - wear a mask, gloves & splash protection for mixing, water droplet mask (P2V) , gloves, coveralls, waterproof boots, eye protection for spraying
Re-entry time - 48 hours,or until dry. Keep unprotected people, animals and children out of the treatment area until all accessible surfaces are dry.
DO NOT USE IN ANY BUILDING THAT HOUSES ANIMALS OR FISH, ASTHMATICS, BABIES OR PREGNANT WOMEN.
Boron Woodworm Treatment in water - supplied diluted in water at 5%
Product Name - Boracol 5RH - a Professional Use Product
Ask your Trade Professional to call us to order this product
20 Year Guarantee Certificate options, for professional use only.
Boron Woodworm Treatment in water - Boracol 5RH
Uses - toxin-free woodworm treatment for bare wood, on floors, walls and in roofs
Why it's so good
Supplied ready to use
Unique features - no smell, no staining, carpet friendly, no solvent, no microemulsion, no Permethrin or Cypermethrin, registered as an Insecticide
Safety benefits - no brain toxins (Permethrin and Cypermethrin), no damage to roofing breather membranes (unlike Microemulsions)
Typical usage - woodworm treatment where odour is not acceptable and maximum safety is required
Buy Boron Woodworm Treatment - 5% ready to use in water
BORACOL 5RH - 5% - 5.0 Litres - £38.40 ex VAT - £46.08 including VAT -
(Cost per litre - £9.22 including VAT)
BORACOL 5RH - 5% - 10.0 Litres - £56.00 ex VAT - £67.20 including VAT -
(Cost per litre - £6.72 including VAT)
BORACOL 5RH - 5% - 25.0 litres - £125.00 ex VAT - £150.00 including VAT -
(Cost per litre - £6.00 including VAT)
GUARANTEE 20 years - £20.00 ex VAT - £24.00 including VAT - bespoke Guarantee Certificate - ask for Application Form -
SAFETY
GLOVES x 100 - £13.70 ex VAT - £16.44 including VAT - box of 100 uni-handed vinyl gloves -
MASK - £8.78 ex VAT - £10.54 including VAT - for Lignotec and Boron water based product spraying -
Note - always wear a mask and gloves during spraying
Spray and Dust Mask (P2V)
MASK - £8.78 ex VAT - £10.54 including VAT - for Lignotec and Boron water based product spraying -
Vinyl Disposable Uni-handed Gloves
GLOVES x 100 - £13.70 ex VAT - £16.44 including VAT - box of 100 uni-handed vinyl gloves -
GUARANTEE
GUARANTEE 20 years - £20.00 ex VAT - £24.00 including VAT - bespoke Guarantee Certificate - ask for Application Form -
Delivery - 2 to 3 day mainland England and Wales - up to 20kgs - £8.75 ex VAT, £10.50 inc. VAT
Other regions available when checking out.
SPRAYERS
5 litre Sprayer
SPRAYER POT - £28.78 ex VAT - £34.54 including VAT - 5 litre Sprayer -
12 litre Heavy Duty Sprayer
SPRAYER BACKPACK - £66.93 ex VAT - £80.32 including VAT - 12 litre Knapsack Sprayer -
ACCESSORIES SUMMARY
MASK - £8.78 ex VAT - £10.54 including VAT - for Lignotec and Boron water based product spraying -
GLOVES x 100 - £13.70 ex VAT - £16.44 including VAT - box of 100 uni-handed vinyl gloves -
SPRAYER POT - £28.78 ex VAT - £34.54 including VAT - 5 litre Sprayer -
SPRAYER BACKPACK - £66.93 ex VAT - £80.32 including VAT - 12 litre Knapsack Sprayer -
How much will I need - Click for Help page.
How much solution will I need for two light coats on rough sawn timber?
5 litres covers approximately 12.5 square metres, with 2 coats
25 litres covers approximately 62.5 square metres, with 2 coats
Important Tips
Apply to bare wood only - will NOT penetrate paint, varnish, stain, wax or other water repellant coatings. This is the same for ALL Insecticides.
Check that water can be absorbed by testing the surfaces using drops of water. If any of the water is repelled do not apply the product.
Application to non-absorbing surfaces or over-application will result in white stains or white crystals being left on the surface when dry.
Remove any liquid with a damp sponge from areas that cannot absorb water before the product dries - e.g. Painted skirting boards.
Failure to wipe off painted surfaces may leave a hard to remove dirty marks caused by over-spray diluted dirt picked up from the floor.
To remove dried on product try hot water, vinegar or diluted Bleach.
Avoid splashing onto metal pipes.
Pack and product details
Pack sizes - 5 litres, 25 litres
Packaging - in plastic bottles, pre-diluted ready to use
Trade - in boxes containing 3 x 5 litres = 15 litres - call for Trade Deal prices
Contains - Boric Acid - not to be confused with Borax Soap, which is Disodium Tetraborate Decahydrate
Using Boron in water 5%
Dilution - already diluted at 5%. Do not dilute.
A Registered Professional product for use in Domestic and Commercial buildings
Application methods - spray, brush or dip, or Microsprayer
Application rate - an average rate of 4 to 5 sq metres per litre, until wet. Apply two coats on rough sawn timber, allowing surfaces to dry in between coats.
Allow only one coat on smooth or planed timbers
Safety using Boron in water at 5%
Choosing a product type - always check with our experts if you are not sure which product is best for your job - 01626 872886
Safety - wear water droplet mask (P2V) , gloves, coveralls, waterproof boots, eye protection for spraying
Re-entry time - 48 hours,or until dry. Keep unprotected people, animals and children out of the treatment area until all accessible surfaces are dry.
DO NOT USE IN ANY BUILDING THAT HOUSES ANIMALS OR FISH, ASTHMATICS, BABIES OR PREGNANT WOMEN.
Boron Woodworm Dry Rot and Mold Treatment - odourless treatments for woodworm in wood also affected by mold or rot
Boracol 10 - a Professional Use Product
20 Year Guarantee Certificate Options
Ask your Trade Professional to call us to order this product
Uses - woodworm treatment with added glycol and moldicide for use on very damp wood and masonry
Boracol 10 - ideal for very damp or moldy surfaces, including yacht and house decks.
Buy Boracol - 10% ready to use, dissolved in water
BORACOL 10 - 10% - 5.0 Litres - £42.00 ex VAT - £50.40 including VAT -
BORACOL 10 - 10% - 10.0 Litres - £63.00 ex VAT - £75.60 including VAT -
BORACOL 10 - 10% - 25.0 Litres - £178.50 ex VAT - £214.20 including VAT -
GUARANTEE 20 years - £20.00 ex VAT - £24.00 including VAT - bespoke Guarantee Certificate - ask for Application Form -
How much will I need - Click for Help page.
Using pre-diluted 10% version
5 litres covers approximately 12.5 sq metres with 2 coats
Useful information
Why it's so good
Chemical action - powerful triple use, as an insecticide, a fungicide and a moldicide, with glycol for maximum penetration on wood and masonry
Unique features - no smell, no staining, carpet friendly, no solvent, no micro emulsion, no Permethrin or Cypermethrin.
Safety benefits - no brain toxins (Permethrin and Cypermethrin), no damage to roofing breather membranes (Microemulsions)
Typical usage - woodworm treatment for dry and damp wood, plus fungal and mold treatment - typically damp roof timbers, mold inside roof spaces, damp floor timbers, decking, yacht decks, sails and ropes.
Pack and product details
Pack sizes - 5 litre and 25 litre
Packaging - in plastic bottles, pre-diluted
Trade - in boxes containing 3 x 5 litres - call for prices
Contains - Boric Acid, Glycol and Benzalkonium Chloride
Using Boracol
Dilutions - already diluted at 10%, do not dilute
Professional use products - 5% and 10% .
Application methods - spray, brush or dip and Microsprayer
Application rate - an average rate of 4 to 5 square metres per litre, per coat, until wet. Apply two light coats, allowing surfaces to dry in between coats.
Safety using Boracol
Choosing a product type - always check with our experts if you are not sure which product is best for your job - 01626 872886
Safety - water droplet mask (P2V) , gloves, coveralls, waterproof boots, eye protection for spraying
Re-entry time - 48 hours, or until dry. Keep unprotected people, animals and children out of the treatment area until all accessible surfaces are dry.
DO NOT USE IN ANY BUILDING THAT HOUSES ANIMALS OR FISH, ASTHMATICS, BABIES OR PREGNANT WOMEN.
Always Buy Safety Accessories
MASK - £8.78 ex VAT - £10.54 including VAT - for Lignotec and Boron water based product spraying -
GLOVES x 100 - £13.70 ex VAT - £16.44 including VAT - box of 100 uni-handed vinyl gloves -
Frequently purchased with this product
SPRAYER POT - £28.78 ex VAT - £34.54 including VAT - 5 litre Sprayer -
SPRAYER BACKPACK - £66.93 ex VAT - £80.32 including VAT - 12 litre Knapsack Sprayer -
Woodworm Boron Gel - 20% - odourless treatments for heavily concentrated woodworm, damp patches, end grain and rot
Product Name - Ecobor 20 2.5 litre or Wykamol 20 5 litre - Professional Use Products
Ask your Trade Professional to call us to order this product
20 Year Guarantee Options, for professional use
Uses - highly concentrated, thicker woodworm and rot treatment for vulnerable damp wood
Boron Ecobor 20 Brushing Gel 20%
Buy Ecobor or Wykamol 20% Brushing Gel
ECOBOR 20 - 20% - 2.5 litres - £31.98 ex VAT - £38.38 including VAT -
WYKAMOL 20 - 20% - 5 litres - £59.00 ex VAT - £70.80 including VAT -
GLOVES x 100 - £13.70 ex VAT - £16.44 including VAT - box of 100 uni-handed vinyl gloves -
GUARANTEE 20 years - £20.00 ex VAT - £24.00 including VAT - bespoke Guarantee Certificate - ask for Application Form -
How much will I need - click for Help page.
Using directly from the can in one good brush coat
2.5 litres covers approximately 10 square metres with 1 coat
Useful information
Why it's so good
Chemical action - triple use, as an insecticide, a fungicide and a moldicide. Because of its heavy brushing base Gel it holds more active ingredient than liquids can and then soaks in gradually.
Unique features - no smell, no staining, carpet friendly, no solvent, no microemulsion, no Permethrin or Cypermethrin.
Safety benefits - no brain toxins (Permethrin and Cypermethrin), no damage to roofing breather membranes (Microemulsions)
Typical usage - woodworm treatment for dry and damp wood, plus fungal and mold treatment.
Typically it is used on floor joist ends and bearing areas, damp roof timbers, backs of skirting boards and architrave's, back of door linings, cut ends of new, pre-treated timbers.
Pack and product details
Pack sizes - 2.5 litres and 5 litres
Packaging - in plastic cans, ready to use
Trade - in boxes containing 4 x 2.5 litres - call for prices
Contains - Boric Acid in a heavy water miscible glycol gel
Using Boron Ecobor 20 Brushing Gel
Dilution - do not dilute
Professional product - supplied at 20%.
Application methods - brush
Application rate - an average rate of 4 square metres per litre, assuming smooth surfaces.
For woodworm treatments 2.5 litres will cover about 2 square metres, 1 litre about 4 sq metres and 2 litres about 8 sq metres.
Safety using Boron Ecobor 20 Brushing Gel
Choosing a product type - always check with our experts if you are not sure which product is best for your job - 01626 872886
Safety - wear water droplet mask (P2V) , gloves, coveralls, waterproof boots, eye protection for brushing
Re-entry time - 48 hours, or until dry, whichever is the longer. Remove all excess using a damp cloth after 48 hours, if the gel has not all been completely absorbed and the treated surfaces are to be left exposed. Wood varies in its ability to absorb products.
Always pass the product Data Sheet to your chosen professional Applicator.
Always Buy Safety AccessoriesGLOVES x 100 - £13.70 ex VAT - £16.44 including VAT - box of 100 uni-handed vinyl gloves -
Woodworm Boron Injectable Gel in Cartridges for injection into joists and beams
Product Name - Ecobor 40 - a Professional Use Product
Ask your Trade Professional to call us to order this product
20 Year Guarantee Options, for professional use
Uses - woodworm and Death Watch Beetle treatment in damp wood, plus rot in damp wood
Always plug the holes to stop the product from drying out - see our Plugs
Buy Boron Ecobor 40 Gel for injection
ECOBOR 40 - 40% - 400cc - £38.90 excluding VAT- £46.68 including VAT -
Includes an extension tube, 8mm diameter x 225mm long
PLUGS are available for the injection holes - see below
GLOVES x 100 - £13.70 ex VAT - £16.44 including VAT - box of 100 uni-handed vinyl gloves -
GUARANTEE 20 years - £20.00 ex VAT - £24.00 including VAT - bespoke Guarantee Certificate - ask for Application Form -
Buy a Professional Skeleton Gun
SKELETON GUN - £16.50 ex VAT - £19.80 including VAT - 400cc skeleton gun -
Plastic Plugs are frequently purchased with this product
PLUGS X 25 - £3.96 ex VAT - £4.75 including VAT - plastic plugs, pack of 25, grey -
PLUGS X 25 - £3.96 ex VAT - £4.75 including VAT - plastic plugs, pack of 25, brick red -
PLUGS X 25 - £3.96 ex VAT - £4.75 including VAT - plastic plugs, pack of 25, stone cream -
How much will I need
Using directly from the plastic cartridge, via the extension nozzle
See our chart of hole spacing for various timber sizes as a guide, or call 01626 872886 and we'll calculate your exact requirements.
(Hole Spacing Guide - click here to download)
Click for Death Watch Beetle Treatment advice - or call 01626 872886 .
Useful information
Why it's so good
Chemical action - triple use, as an insecticide, a fungicide and a moldicide. It is capable of rapid spread in damp wood.
Unique features - no smell, no staining, carpet friendly, no solvent, no microemulsion, no Permethrin or Cypermethrin.
Safety benefits - no brain toxins (Permethrin and Cypermethrin), no damage to roofing breather membranes (Microemulsions).
Typical usage - woodworm treatment where a high active ingredient loading and maximum penetration are needed - end grain, damp structural timbers, heavy woodworm infestation
Pack and product details
Pack sizes - 400cc
Packaging - in plastic cartridges to fit standard skeleton guns, including plastic extension nozzles
Trade - in boxes containing 10 x 400cc cartridges - call for prices
Contains - Boric Acid in a heavy water miscible glycol gel
Using Boron Ultra B40 Gel
Ready to use at 40%. Do not dilute.
Application methods - back fill into 10mm diameter holes drilled into damp wood
Application rate - holes to be 10mm diameter up to 110mm between centres, lengthwise, along the grain and 75mm between centres widthwise across the grain, leaving at least 15mm of wood at edges and hole bases.
Safety using Boron Injection Gels supplied ready to use at 20%
Choosing a product type - always check with our experts if you are not sure which product is best for your job - 01626 872886
Safety - wear gloves and coveralls
Re-entry time - not relevant - plug all holes after injection using our plastic plugs or wooden dowel. Keep unprotected people, animals and children out of the treatment area until all accessible surfaces are covered e/g. skirting boards and door linings refitted, floor joists re-boarded.
Note - always wear gloves during application
Vinyl Disposable Uni-handed Gloves
Always Buy Safety Accessories
GLOVES x 100 - £13.70 ex VAT - £16.44 including VAT - box of 100 uni-handed vinyl gloves -
Woodworm Timber Injection Gel for dry wood - Death Watch Beetle and House Longhorn Beetle
Product name - Lignum Pro Gel
For use in dry wood - use Boron based versions shown above in damp wood - for professional use
Uses - Death Watch Beetle and rapid spreading House Longhorn Beetle in dry wood - below 12% WME - for injection indoors and outdoors
Ask your Trade Professional to call us to order this product
20 Year Guarantee Options, for professional use
Always plug the holes to stop the product from drying out - see our Plugs
Can be injected directly using the extension tube provided, or via valved Timber Injectors.
Click for Death Watch Beetle Treatment advice - or call 01626 872886
Click for House Longhorn Treatment advice - or call 01626 872886 .
Buy Timber Injection Gel (for dry wood)
Cartridge supplied with an 8mm x 200mm extension tube,
longer extended nozzles are made to order
LIGNUM INJECTION GEL 300CC - £26.30 ex VAT - £31.56 including VAT -
Always plug the holes to stop the product from drying out - see our Plugs
GLOVES x 100 - £13.70 ex VAT - £16.44 including VAT - box of 100 uni-handed vinyl gloves -
Buy a Professional Skeleton Gun
SKELETON GUN - £16.50 ex VAT - £19.80 including VAT - 400cc skeleton gun -
Plastic Plugs are frequently purchased with this product
PLUGS X 25 - £3.96 ex VAT - £4.75 including VAT - plastic plugs, pack of 25, grey -
PLUGS X 25 - £3.96 ex VAT - £4.75 including VAT - plastic plugs, pack of 25, brick red -
PLUGS X 25 - £3.96 ex VAT - £4.75 including VAT - plastic plugs, pack of 25, stone cream -
Optional - Timber injectors, for 10mm diameter holes
Injector, with one-way valve inside
Just drill and hammer in
Buy 10 - £1.99 ex VAT, including VAT - £2.38 -
Buy 100 - £19.87, including VAT - £23.80 -
Buy 1000 - £198.66, including VAT - £238.00 -
Syringe fits into injector tightly
Syringes to fit injectors
Buy 10cc Syringe - £0.52 ex VAT, including VAT - £0.62 -
Buy 20cc Syringe - £0.75 ex VAT, including VAT - £0.90 -
Buy 50cc Syringe - £1.78, including VAT - £2.14 -
How much will I need - Typical Uses Help.
Using directly from the plastic cartridge via the extension nozzle
See our chart of hole spacing for various timber sizes as a guide, or call us on 01626 872886 and we'll calculate your exact requirements. (Hole Spacing Guide - click here to download)
Useful information
Why it's so good
Chemical action - double use, as an insecticide and a fungicide, penetrates dry wood fast, kills insects on contact
Unique features - spreads rapidly inside dry wood
Safety benefits - it is hidden inside the wood, with plugs fitted to the holes, so that no vapour or smell can escape into the building
Safety - fully UK Licensed, keep away from fish and caged birds.
Typical usage - woodworm treatment where fast spread is needed inside dry (below 12%) in structural timbers to stop the spread of House Longhorn Beetle
Pack and product details
Pack sizes - 300cc
Packaging - in plastic cartridges to fit standard skeleton guns, including extension nozzles
Trade - in boxes containing 10 x 300cc cartridges - call for prices
Contains - Permethrin in gel base
Using Timber Injection Gel
Dilutions - already diluted in a Microemulsion
Application methods - back fill 10mm diameter holes drilled into dry wood
Application rate - holes to be 10mm diameter up to 110mm between centres lengthwise along the grain and 75mm between centres widthwise across the grain, leaving at least 15mm of wood at edges and hole bases.
Safety using Timber Injection Gel
Choosing a product type - always check with our experts if you are not sure which product is best for your job - 01626 872886
Safety - wear gloves and coveralls
Re-entry time - not relevant - plug all holes after injection using our plastic plugs or wooden dowel
Always pass the product Data Sheet to your chosen professional Applicator.
Spraying FloorsSpraying timbers for woodworm is best done to both sides of floorboards, as far as practical and to all exposed sides of joists.
The Trade usually removes every third or fourth floorboard for access.
On the ground floor clean all rubbish from the ground under the floor, clean the air bricks and check for damp (poke the joists with a screwdriver and look for dark coloured soil). Also check front, side and rear ground levels - they all should be at least 6 inches (150mm) below the original Damp Proof Course or the bottom of the air bricks, whichever is the lower.
Always pass the product Data Sheet to your chosen professional Applicator.
Professional use products
These products can only be purchased for use by a trade professional.
Ask your Trade Professional to call us to order this product
SHOPS
Repairs | Beams | Privacy Policy | Returns Policy
Contact | About Us | About the Author
Property Repair Systems
T: 01626 872886
E: Mail us help@propertyrepairsystems.co.uk
Other Property Repair Systems Sites:
www.drywallandfloor.co.uk - membranes for lining damp walls, floors, basements and cellars
www.epoxy-info.co.uk - epoxy resins for repairing wood, concrete, brick and stone
www.fire-door-paint.co.uk - upgrade doors to 30 minutes fire resistance
www.joist-repair.co.uk - how to quickly repair joists and beams of any size
www.propertyrepairsystems.co.uk - our Home Site
www.steel-fire-paint.co.uk - treat steel with Intumescent Paint to provide fire protection
www.timber.org.uk - systems of repair, with step by step methods
Site written by: David Moore
David Moore, B.A. (Hons.), C.T.I.S., C.R.D.S. Technical Author
Google+
